Sex machines are generally a investment. They cost several hundred dollars, involve complicated machinery, and take up so much space in your home that you would only need one if you planned to use it regularly. But if there were ever a sex machine for people who have a more casual interest, the Lovense Mini Sex Machine could be the one.
The Lovense Mini falls into the category of devices designed primarily to simulate penetration. A long rod with a dildo on the end is attached to a motor that repeatedly pushes forward. Devices like this can be quite bulky, in part because the force required to maintain penetration is deceptively substantial. Weak motors can put pressure on the human body, and if the devices themselves don’t have a way to stabilize, the motor can end up pushing the device. far of the person, instead of pushing inward.
This is what makes the Lovense mini version of your badge sex machine so impressive. The main body of the machine is about a foot long and the stabilizing legs are equally less than a foot tall. When disassembled, everything can fit neatly in the back corner of a closet or wide drawer, and when assembled, it’s small enough to fit comfortably on a bed without getting in the way. Combined with a $400 price tag (hundreds less than most comparable sex machines), it’s one of the hottest devices in this sex toy space.
For whom is this?
Part of the challenge when justifying the purchase of a sex machine is that every body has different needs. What feels good to one person may not be of much use to another. So, we can get this straight from the start: if penetration doesn’t do much for you, then this machine probably isn’t for you. Other machines like the Motorbunny Buck are designed to provide penetration. and vibration, so it might be a better direction to look if you want different types of stimulation.
if the penetration is However, if you like something, Lovense Mini Sex Machine has a lot to offer. Despite its small size, Lovense claims that the motor reaches up to 260 pulses per minute, and in my tests it was a very slight figure. lowestimate. In practice, the device regularly achieves between 270 and 280 pulses per minute at its maximum speed.
The length of the stroke is also adjustable, although the process is a bit complicated. It requires removing the panel on the side of the device and using an Allen wrench to tighten a bolt that holds the pushrod to the motor. At its maximum, it can push forward up to three inches and closer to one inch at the bottom end.
While stroke length doesn’t affect thrusts per minute much, it does have a pronounced impact on how wild this machine gets. When adjusted to longer stroke lengths and higher speeds, the motor could shake the machine and throw it off the table. At most moderate speeds and lengths, this was not a problem, but it is something to keep in mind when using this machine while it is No in a table.
Photography: Lovense